LS200-MF8
LS200-MF8
IP30 LoRaWAN Multi-functional Sensor
O Planet LS200-MF8 faz parte dos grupos dos Ethernet Industrial, , LoRaWAN Sensor e dispõe dos seguintes recursos:
- Temperature
- Humidity
- PIR
- Illumination
![[item_en]](images/box_LS200-MF8_01.jpg)
![[item_en]](images/box_LS200-MF8_02.jpg)
![[item_en]](images/box_LS200-MF8_03.jpg)
![[item_en]](images/box_LS200-MF8_04.jpg)
| Wireless Transmission | |
|---|---|
| Technology | LoRaWAN |
| Frequency | LS200-MK8-EU868 863–870 MHz LS200-MF8-US915 902–928 MHz |
| TX Power | LS200-MK8-EU868 EU868 16dbm IN865 20dbm (optional) LS200-MF8-US915 US915 20dbm AS923 16dbm (optional) AU915 20dbm (optional) KR920 14dbm (optional) |
| Rx Sensitivity | -136dBm (LoRa, Spreading Factor = 12, Bitrate = 293bps) -121dBm (FSK, Frequency Deviation = 5kHz, Bitrate = 1.2kbps) |
| Work Mode | OTAA/ABP Class A |
| Data Interfaces | |
| Power Supply | 2x 3.0V CR2450 button battery (Battery not included) |
| Operating Voltage | DC 2.3 ~ 3V |
| Battery Life Time | 2.26 years (Conditions: ambient temperature 25 °C, 15 min report once, TX power = 20dBm, LoRa spreading factor SF = 10) |
| Low Battery Threshold | 3.2V |
| Physical Characteristics | |
| Dimensions (L x W x H) | 75.5 x 19.4 x 44 mm |
| Weight | 120 g |
| Sensor Dimensions | Reed Switch: 46 x 16 x 12.9mm Glass Break Sensor: 36 x 36 x 7.9mm |
| Ingress Protection | IP30 Reed switch - IP67 glass break - IP40 |
| Sensor Measurements | Temperature Sensor Information Measurement Range: -20°C to 55°C Measurement Accuracy: ±1°C Humidity Sensor Information Measurement Range: 0% RH to 100% RH Measurement Accuracy: ±7%RH Passive Infrared Sensor Information Detectable Angle: 80° horizontally / 55° vertically Detectable Range: 3m to 5m Light Sensor Information Illumination Measurement Range: 1 Lux to 3000 Lux Illumination Measurement Accuracy: <15% Tilt Sensor Information Conversion Angle: 45±5 degrees Contact Resistance: Less than 10 ohms The Insulation Resistance: Greater than 100 megohms Operating Temperature: -40°C to 85 °C Installation Type: Suitable for PCB at vertical state Vibration Sensor Information Model: Ball type omnidirectional signal trigger switch Voltage: <6V Current: 2uA to 10mA Insulation Resistance: >10M Ω Trigger Rate: 100% (amplitude > 1 mm, frequency > 20 Hz) Trigger Frequency: >50Hz Reed Switch Sensor Information Minimum Insulation Resistance 10^10 Ω Maximum Contact Resistance 100m Ω Maximum Switching Current 0.5A Glass Break Sensor Information Detection Mode: Piezoelectric buzzer Power Supply: Self-generated voltage chip Impedance: Normal (NC): 7Ω (max) Alarm (NO): 1MΩ (min) Sensor Sensing Range: within 2.5M radius Signal Sensing Time: 1-3 seconds Loop Voltage: 15VDC (max) Loop Current: 25mA (max) Operating Temperature: -10 to 50 °C Wire Length: 100cm |
| Operating Temperature | -10°C to 50°C |
| Relative Humidity | <90% RH (non-condensing) |
| Storage Temperature | -40 °C ~ 85 °C |
| Standards Conformance | |
| Regulatory Compliance | CE RED, FCC PART 15B |
